Euro/Toggle Foot Activators
How They Work
Tapmaster® foot activators are installed on the toe kick and are activated by tapping the probe in any direction. To leave the water running or use your faucet like normal – press the probe directly left or right until you feel a click! When you want to turn the water off, just snap the probe back to the center position with your foot. It’s easier than it sounds!
Tapmaster® probes are made of a soft and flexible rubber compound that is easy on the feet and extremely durable. The main body of the activator is constructed of solid anodized aluminum and stainless steel..
Common Questions
How durable is the toggle?
The probe or toggle on Tapmaster® foot activators is a very durable flexible injection moulded plastic component. While it is rare - the probe does wear out from time to time. But it is covered by a comprehensive 10 year warranty. Out of warranty it is a low cost replacement part.
Why is it not called the "Euro" anymore?
Well, when we first released the product we were based entirely in North America and we felt "Euro Activator" communicated its sleek and modern design. We have since launched our products in Europe and our European customers wondered if it was the only version they could purchase. So, we did some market research and settled on Toggle activator.
Can I Leave the Water Running?
Yes, the Tapmaster® Toggle activator can be locked into the running position by sweeping the probe all the way to the left or right until it clicks. This feature is disabled on Model 1770 and 1771 SKUs for safety in commercial settings.
Specs
| Pressure | Operating: 0-125psi (862kpa) Static Burst: 700psi (4830kpa) |
|---|---|
| Flow | 7.2gpm @ 60psi (27.01m³ @ 4 bar) |
| Connections | Inlet: Integrated 3/8″ compression nut “O” ring seal Outlet: Nut and Sleeve 3/8″ |
| Filtration | Main Flow: 0.06″ (1.5mm) Control Circuit: 25 micron |
| Construction | Valve Bodies: Chrome Plated Brass Seals: Silicone Control Tubing: proprietary high density polyurethane |
| Dimensions | Main Valve Blocks: 2.5″ x 0.88″ x 1.25″ (6.35 x 2.24 x 3.18 cm) Activator Valve: 0.63″ x 0.63″ x 1.0″ (1.60 x 1.60 x 2.54 cm) |
Installation Instructions and Submittal Documents
Installation Instructions (PDF)
Submittal – Model 1770/1775 Toggle Activators (PDF)